If you receive the product surface scratches, please rest assured that this is a new product, just a little scratched, as shown in the video to tear off the protective film can be

Warm reminder:

Warning:
Matters needing attention (buyers must see)

The product has just been received, you must first turn on the flashlight to discharge, and then charge the product for more than 4 hours, and then start the car, because the product is empty. This operation can prolong the service life of the product!

1. Make sure to use this product when the battery is fully charged.
2. When the car is started, the  plug of the battery clip must be firmly inserted in place, otherwise the starting effect will be affected.
As a result, it may even cause the melting of the joint plastic.
3. If the car cannot start, please check whether the battery clamp is intact and whether the battery connector is rusty
Or it is dirty, continue to start after cleaning (if you fail to start after 3 attempts, do not start by force, otherwise it will cause damage to the product, you should further check the vehicle for other faults.)
4. Do not clamp the battery clamps at both ends, otherwise it may cause a safety accident.
5. Please remove the host within 30 seconds of starting the car, otherwise it may cause a safety accident.
6. Do not disassemble the machine by yourself, otherwise it may cause a safety accident.

Features:

*1. The product adopts high-light technology, small size, easy to carry, lightweight and large capacity.

*2. Universal for multiple models, 12V car emergency boot, high-rate battery easy start.

*3. With a USB output port, it can charge mobile phones, MP3 and other devices.

*4. Equipped with an LED flashlight for emergencies.

*5. The high-performance polymer lithium battery cell resists temperature from -20°C to 60°C to ensure that the battery stops and starts normally. The thickened and thick battery clip is safe and does not hurt the car.

Description:

*1. Material: ABS

*2. Size: Approx.13.9x7.8x2.4cm/5.47x3.07x0.94inches

*3. Starting current: 600A

*4. Input Interface: USB-C

*5. LED Light: yes

*6. Socket Type: USB

*7. Input: 5V/1A

*8. Output: 5V/2A, 12V

*9. Working Temperature: -20℃~+60℃

*10. Applicable Models: 12V gas vehicles

Package Includes:

1 x Car Jump Starter

🚗 How to Jump Start Your Car:

1. First Charge - Fully charge for 4+ hours before first use

2. Connect - Red clamp to battery (+) terminal, black clamp to clean metal ground

3. Start - Insert connector, turn ignition (max 3 seconds per attempt)

4. Wait - If unsuccessful, wait 60+ seconds before next try

5. Disconnect - Remove within 30 seconds after starting